Often safety signs are printed onto white plastic. Should the power fail, those signs are not visible in the dark. Permalight® safety signs light up in the dark and show their message with lights on and lights off. You may choose from two material types:
» Easy peel-and-stick, self-adhesive film
Simply take off the paper backing and apply the signs to a smooth, clean surface. Also great on columns, pipes and similar curved surfaces.
» Durable rigid PVC, non-adhesive
These stiff, smooth signs work great on uneven, rough surfaces, even on brick wall. Attach with double-sided tape or Liquid Adhesive.
For our nationwide high-rise building code compliant photoluminescent floor products, please visit our IBC/IFC compliance page.
According to the Occupational Safety and Health Administration (OSHA), most general industry incidents involve slips, trips and falls. To prevent workplace accidents in a variety of settings, such as industrial and manufacturing environments, Permalight® offers you a selection of durable photoluminescent safety products. Please contact us for a consultation if you have rather dirty floors or heavy forklift traffic, to mention a few possible situations.
Aluminum Discs with center hole: ideal for Gratings and Catwalks but also highly durable when installed flat onto a concrete floor. Two sizes available. Also available printed with a directional arrow. Very good skid prevention. Ten (10) discs per package.
For floor-installed tape markings, we recommend these important accessories. If liquids (such as cleaning solutions, water) get between floor tape and installation surface, such liquids can attack the adhesive and over time loosen the floor-installed marking. The primer makes the floor surface well-receptive for the tape. The pressure roller squeezes out any air bubbles and makes sure the tape adhesive makes full contact with the floor surface. The edge sealer prevents liquids from getting to the adhesive.
Outstanding slip resistance! Increased slip-resistance due to coarse / rough 3M Safety Walk™ surface: abrasive particles are embedded into a tough clear polymer backing. Do NOT curve or round this tape. Self-adhesive. Permalight® power 150/22 luminance.
This tape has a structured, patterned vinyl surface. It is best suited for smooth, straight floor surfaces. Do NOT curve or round this tape. Self-adhesive. Permalight® anti-slip floor tape, intended for indoor applications, may be used to mark uneven floor levels, single steps or a flight of stairs. This tape is UL-listed as Model CC-AST to UL1994 – Standard for Luminous Egress Path Marking Systems and successfully passed the requirements of UL410 – Standard for Slip Resistance of Floor Surface Materials. The 2 inch width complies with the ADA (Americans with Disabilities Act) requirements: California Building Code "Striping for the Visually Impaired", requiring the upper approach and the lower tread of each flight of interior stairs to be marked by a slip resistant strip of clearly contrasting color with at least 2 inches width.
This self-adhesive polycarbonate marker has a gritty anti-slip surface. The arrow and running man message clearly indicates the direction of your evacuation route. Simply insert this marker between two 2-inch tape lengths … or use it on its own. Permalight® power 150/22 luminance
These self-adhesive Anti-skid dots have the same gritty anti-slip surface as the directional marker. One dot per foot is an ideal spacing to create a visual guidance system. The polycarbonate is extra durable and the gritty surface provides very good skid prevention. Ten (10) identical dots per package: either all-photoluminescent or green with glow chevron.
These self-adhesive Anti-skid dots have the same structured, patterned vinyl surface as the above described Anti-Skid Tape Rolls. One dot per foot is an ideal spacing to create a visual guidance system. Twelve identical 3.5 inch diameter dots per sheet: either all-photoluminescent or with a green arrow.